Plasma Electrode S002Y . 11.843.021.320 for Kjellberg Plasma Cutting Torch Consumables
The difference between Kjellberg fine plasma cutting and Hyperthermn
Both Kjellberg plasma cutting and Hyperthermn Plasma have a long service life; Self diagnosis runs through the entire initiation and cutting process with extremely high productivity, both of which have extremely fast cutting rates; Has extremely strong perforation ability and lower production costs
Both Kjellberg and Hyperthermn Plasma have a higher number of parts to be cut per unit time, resulting in lower cutting costs; The longer lifespan of vulnerable parts reduces the difference in cutting costs:
Kjellberg plasma cutting:
(1) The incision is vertical (-1 ° -2 °); The verticality of both sides of the incision is the same
(2) The surface of the incision is free of cutting slag and almost smooth, forming in one go without the need for secondary processing
(3) Spray nozzle cooling with direct water cooling, long service life
(4) Compared to Hyperthermn Plasma, Kjellberg plasma cutting has no arc interference and is very stable in debugging and practical use
(5) Equipped with an automatic arc voltage adjustment unit (KHC9100) to ensure high cutting accuracy
Detailed Photos
Part Number:
S002Y
Plasma Power Source:Kjellberg cutting torch
NOZZLE:
The nozzle focuses the plasma arc and the gas that surrounds it to make a clean and precise cut. A nozzle with a larger opening is used for gouging, while a nozzle with a smaller opening is better able to direct the gas and so is used for fine, detailed work.
ELECTRODE:
The electrode is a narrow piece of copper containing hafnium (which is an excellent conductor of electricity). Its job is to receive the electrical current from a cathode block inside the torch to which it is connected, and to focus the charge through its tip, which causes it to arc onto the workpiece.
Retaining cap:
The retaining cap essentially holds all of the consumable parts of the torch together. As temperatures at this end of the machine are extremely high, it's not just the parts creating and focussing the arc that are worn down; the component holding them together also degrades over time.
Shield cap:
The shield is there to protect the torch and its other components from the sparks and molten metal that result from the plasma cutting process. It takes the brunt of the fallout so that wear to other components is minimised as much as possible.
We will provide you with an overview of all current and legacy Hypertherm plasma cutting systems, so you could see which option fits best your needs.
Why choose weicheng plasma consumables?
| Machine |
Thum NO. |
Ref NO. |
Description |
| HiFocus 160i PerCut 160 |
S901 |
.11.842.401.152 |
Cooling tube |
| PerCut 170 |
R901 |
.11.842.601.152 |
Cooling tube |
| |
S002X |
.11.843.021.310 |
Electrode O2 XL S002X |
| S002Y |
.11.843.021.320 |
Electrode O2 XL S002Y |
| S012X |
.11.843.121.310 |
Electrode O2 XL S012X |
| R002 |
.11.842.621.310 |
Electrode O2 XL R002 |
| R012 |
.11.842.721.310 |
Electrode O2 XL R012 |
| Z101 |
.11.835.221.153 |
Swirl ring Z101, 3 Holes |
| Z102 |
.11.835.221.154 |
Swirl ring Z102, 2 Holes |
| Z111 |
.11.834.321.153 |
Swirl ring Z111 |
| Z111A |
.11.835.421.303 |
Swirl ring Z111A |
| S2006X |
.11.843.021.406 |
Nozzle ø 0.6 S2006X 25A |
| S2007X |
.11.843.021.407 |
Nozzle ø 0.7 S2007X 35A |
| S2008X |
.11.843.021.408 |
Nozzle ø 0.8 S2008X 50 A |
| S2009X |
.11.843.021.409 |
Nozzle ø 0.9 S2009X 70A |
| S2010X |
.11.843.021.410 |
Nozzle ø 1.0 S2010X 80A |
| S2011X |
.11.843.021.411 |
Nozzle ø 1.1 S2011X 90A |
| S2012X |
.11.843.021.412 |
Nozzle ø 1.2 S2012X 100A |
| S2014X |
.11.843.021.414 |
Nozzle ø 1.4 S2014X 130A |
| S2016X |
.11.843.021.416 |
Nozzle ø 1.6 S2016X 160A |
| S2112X |
.11.843.121.412 |
Nozzle ø 1.2 S2112X 100A |
| S2114X |
.11.843.121.414 |
Nozzle ø 1.4 S2114X 130A |
| S2116X |
.11.843.121.416 |
Nozzle ø 1.6 S2116X 160A |
| R2006 |
.11.842.621.406 |
Nozzle ø 0.6 R2006 25A |
| R2007 |
.11.842.621.407 |
Nozzle ø 0.7 R2007 35A |
| R2008 |
.11.842.621.408 |
Nozzle ø 0.8 R2008 50A |
| R2009 |
.11.842.621.409 |
Nozzle ø 0.9 R2009 70A |
| R2010 |
.11.842.621.410 |
Nozzle ø 1.0 R2010 80A |
| R2011 |
.11.842.621.411 |
Nozzle ø 1.1 R2011 90A |
| R2012 |
.11.842.621.412 |
Nozzle ø 1.2 R2012 100A |
| R2014 |
.11.842.621.414 |
Nozzle ø 1.4 R2014 130A |
| R2016 |
.11.842.621.416 |
Nozzle ø 1.6 R2016 160A |
| R2112 |
.11.842.721.412 |
Nozzle ø 1.2 R2112 100A |
| R2114 |
.11.842.721.414 |
Nozzle ø 1.4 R2114 130A |
| R2116 |
.11.842.721.416 |
Nozzle ø 1.6 R2116 160A |
| S3004 |
.11.842.401.160 |
Nozzle cap ø 0.4 S3004 |
| S3008 |
.11.842.401.162 |
Nozzle cap ø 0.8 S3008 |
| S3028 |
.11.842.401.1622 |
Nozzle cap ø 0.8 S3028 |
| R3004 |
.11.842.601.160 |
Nozzle cap ø 0.4 R3004 |
| R3008 |
.11.842.601.162 |
Nozzle cap ø 0.8 R3008 |
| R3018 |
.11.842.601.1621 |
Nozzle cap ø 0.8 R3018 |
| R3028 |
.11.842.601.1622 |
Nozzle cap ø 0.8 R3028 |
| Z4015 |
.11.835.201.1561 |
Shield ø 1.5 Z4015 |
| Z4020 |
.11.835.201.1571 |
Shield ø 2.0 Z4020 |
| Z4022 |
.11.835.201.1551 |
Shield ø 2.2 Z4022 |
| Z4025 |
.11.835.201.1581 |
Shield ø 2.5 Z4025 |
| Z4030 |
.11.835.201.1591 |
Shield ø 3.0 Z4030 |
| Z4140 |
.11.835.401.1571 |
Shield ø 4.0 Z4140 |
| R4020 |
.11.842.601.157 |
Shield ø 2.0 R4020 |
| R4022 |
.11.842.601.155 |
Shield ø 2.2 R4022 |
| R4025 |
.11.842.601.158 |
Shield ø 2.5 R4025 |
| R4130 |
.11.842.701.158 |
Shield ø 3.0 R4130 |
| R4140 |
.11.842.701.159 |
Shield ø 4.0 R4140 |
| Y4015 |
.11.838.001.1561 |
Shield ø 1.5 Y4015 |
| Y4020 |
.11.838.001.1571 |
Shield ø 2.0 Y4020 |
| Y4022 |
.11.838.001.1551 |
Shield ø 2.2 Y4022 |
| Z501 |
.11.835.201.081 |
Proctive Cap Z501 |
1.Excellent perforation ability:
Plasma consumables can smooth cut / cut flat
Our Plasma spare parts can cut iron plate/aluminym plate/steel plate
2.Our Plasmas Consumables have long life with high cost performance more excellent than other brands
Product Recommendations
Company Profile
About our factory
Changzhou Weicheng Welding and Cutting Manufacturer Co.,Ltd. is a manufacturer located in Changzhou, Jiangsu and near Shanghai with good location, convenient transportation and complement resources.We have our own factory and have advanced full automatic equipment to ensure the quality of all products. It strictly follows European & American Design and Use Standard and adopts an advanced management system and strict quality control. Our company has specialized in plasma welding and cutting machineparts for many years. Our main products include plasma cutting torch head and replacement parts such as plasma electrode, plasma nozzle and so on. We cooperate with manyfamous brands from different countries.
Weicheng welding and cutting equipment manufacturing co., LTD specializes in the production and sales of Thermal Dynamics electrode nozzles,Hyperther 1250 electrode nozzles, Hyperther 65A/85A electrode nozzles, Hyperther 85-65, powermax1250 and other welding and cutting accessories. The company has exquisite skills, perfect quality management system. The company's main product brands are Hyperther, Thermal Dynamics, Trafimet, kjellberg, and so on, the products have plasma electrodes, plasma nozzles, plasma cutting torch,plasma protective cover,plasma shielding cover, domestic plasma cutting machine accessories. Widely used in shipbuilding, steel structure, elevator plant, heavy industry equipment, petrochemical and other industries, in the same industry are in a leading position. In recent years, the customers we have worked with have given a lot of good feedback and evaluation.
About our production equipment
We have multiple production lines and professional equipment such as vacuum plasma processing machines, plasma surface treatment machines, plasma cleaning machines, and plasma glue removers.
We can produce a large number of consumables such as plasma nozzles and plasma electrodes to improve product performance and quality.
Certifications
Packaging & Shipping
FAQ
Q1: Can I have a sample for testing?
A: Yes, we can support sample . The sample will be charged reasonably according to the negotiation between us.
Q2: Can I add my logo on the boxes/cartons?
A: Yes, we have a R&D capability and professional & efficient team, OEM and ODM are available from us.
Q3: What are the benefits of being a distributor?
A: Special discount Marketing protection.
Q4: How can you control the quality of products?
A: Yes, we have engineers ready to assist customers with technical support problems, any issues that may arise during the quoting
or installation process, as well as aftermarket support.
Q5: Can we mix items in full container?
A: Yes. We ship our products in bulk, usually 40 Feet High Cube Containers, but 20 feet containers are also acceptable.
){kind=link}