Trafimet A141 Torch and Parts PF0155 Plasma Cutting Torch Head
Hyperthermmn,:PMX45,PMX1250,PMX1650,PMX45/65/85/105/PMX125/PRO200,HSD130 ,Thermal dynamic
Trafimet : S45, S75, S105, A101, A141, A151, CB50 , CB70, CB150,S125
P80,AG60,PT31,AG100 ,SG51,JG60,JG100,SG55,trafimet serise cutting torch and part
Detailed Photos
Part Number:
PF0155
Plasma Power Source:Trafimet A101 Torch
NOZZLE:
The nozzle focuses the plasma arc and the gas that surrounds it to make a clean and precise cut. A nozzle with a larger opening is used for gouging, while a nozzle with a smaller opening is better able to direct the gas and so is used for fine, detailed work.
ELECTRODE:
The electrode is a narrow piece of copper containing hafnium (which is an excellent conductor of electricity). Its job is to receive the electrical current from a cathode block inside the torch to which it is connected, and to focus the charge through its tip, which causes it to arc onto the workpiece.
Retaining cap:
The retaining cap essentially holds all of the consumable parts of the torch together. As temperatures at this end of the machine are extremely high, it's not just the parts creating and focussing the arc that are worn down; the component holding them together also degrades over time.
Shield cap:
The shield is there to protect the torch and its other components from the sparks and molten metal that result from the plasma cutting process. It takes the brunt of the fallout so that wear to other components is minimised as much as possible.
We will provide you with an overview of all current and legacy Hypertherm plasma cutting systems, so you could see which option fits best your needs.
| Plasma Cutting Torch A141 |
| Item |
Plasma Cutting Torch A141 |
| Rating |
140 Amps @ 60% Duty Cycle Cutting Capacity: 35mm Max(most materials) |
| Rear Connector |
Central Connector, 1/8 BSP, M16*1.5 |
| Certification |
ISO9001, CCC, CE, ROHS, TUV |
| Packing |
1set/box neutral packing, 5sets/Carton Box |
| Plasma Cutting Spare Parts: Torch head, Tip, Electrode, Swirl Ring, Gas Diffuser, Nozzle Rtaining Cap |
| PF0155 |
Torch Head -Hand |
| PF0102 |
Torch Head - Machine |
| EA0131 |
O-Ring - Torch Head |
| FH563 |
Diffuser |
| P1502 |
Extended Diffuser |
| PR0101 |
Electrode Harfnium |
| PR116 |
Extended Electrode |
| PE0101 |
Swirl Ring |
| PE0103 |
Swirl Ring for Extended Electrode |
| PD0101-11 |
Nozzle 1.1mm |
| PD0101-14 |
Nozzle 1.4mm |
| PD0101-17 |
Nozzle 1.7mm |
| PD0101-19 |
Nozzle 1.9mm |
| PD0101-30 |
Gouging Nozzle 3.0mm |
| PD0111-12 |
Extended Nozzle Max 50 Amp, 1.2mm |
| PD0117-14 |
Extended Nozzle 1.4mm Max 90 Amp |
| PD0117-17 |
Extended Nozzle 1.7mm Max 120 Amp |
| PD0117-19 |
Extended Nozzle 1.9mm Max 150 Amp |
| PC0101 |
Nozzle Retaining Cap |
| PC0103 |
Contact Nozzle Retaining Cap |
| CV0023 |
Spacer for Contact Cutting |
| CV0039 |
Large Spacer for Contact Cutting |
| CV0008 |
Shield Cup, Hand (Max 50 Amp) |
| CV0009 |
Spacer for Ext. Contact Cutting |
| CV0011 |
Stand off Spring |
| CV0012 |
Double Pointed Spacer |
| CV0014 |
Grown Spacer |
| CV0013 |
Gouging Spacer |
| PP2524/B |
Gouging Spacer for Item 14 |
| PP2525 |
Spacer c/w Spring |
| PP2014 |
Spacer Springs |
| PP5860 |
Spacer Contact Cutting - Hand (Use with Item 10, 14&27) |
| PP2580 |
Spacer Contact Cutting - Machine (Use with Item 10, 14&27) |
| PP2590 |
Locking Nut |
| PP5850 |
Spacer Holder Protection Nut |
| PP2050 |
Spacer Springs |
| C1356 |
Handle c/w Switch |
| Switch |
| C3055623 |
Handle - Machine Torch |
| trafimet s45 torch and parts |
trafimet s75 torch and parts |
| trafimet s105 torch and parts |
trafimet S125 torch and parts |
| trafimet A101 torch and parts |
trafimet A141 torch and parts |
| trafimet A151 torch and parts |
trafimet CB50 torch and parts |
| trafimet CB70 torch and parts |
trafimet CB150 torch and parts |
Why choose weicheng plasma consumables?
1.Excellent perforation ability:
Plasma consumables can smooth cut / cut flat
Our Plasma spare parts can cut iron plate/aluminym plate/steel plate
2.Our Plasmas Consumables have long life with high cost performance more excellent than other brands
Product Recommendations
Company Profile
About our factory
Changzhou Weicheng Welding and Cutting Manufacturer Co.,Ltd. is a manufacturer located in Changzhou, Jiangsu and near Shanghai with good location, convenient transportation and complement resources.We have our own factory and have advanced full automatic equipment to ensure the quality of all products. It strictly follows European & American Design and Use Standard and adopts an advanced management system and strict quality control. Our company has specialized in plasma welding and cutting machineparts for many years. Our main products include plasma cutting torch head and replacement parts such as plasma electrode, plasma nozzle and so on. We cooperate with manyfamous brands from different countries.
Weicheng welding and cutting equipment manufacturing co., LTD specializes in the production and sales of Thermal Dynamics electrode nozzles,Hyperther 1250 electrode nozzles, Hyperther 65A/85A electrode nozzles, Hyperther 85-65, powermax1250 and other welding and cutting accessories. The company has exquisite skills, perfect quality management system. The company's main product brands are Hyperther, Thermal Dynamics, Trafimet, kjellberg, and so on, the products have plasma electrodes, plasma nozzles, plasma cutting torch,plasma protective cover,plasma shielding cover, domestic plasma cutting machine accessories. Widely used in shipbuilding, steel structure, elevator plant, heavy industry equipment, petrochemical and other industries, in the same industry are in a leading position. In recent years, the customers we have worked with have given a lot of good feedback and evaluation.
About our production equipment
We have multiple production lines and professional equipment such as vacuum plasma processing machines, plasma surface treatment machines, plasma cleaning machines, and plasma glue removers.
We can produce a large number of consumables such as plasma nozzles and plasma electrodes to improve product performance and quality.
Certifications
Packaging & Shipping
FAQ
Q1: Can I have a sample for testing?
A: Yes, we can support sample . The sample will be charged reasonably according to the negotiation between us.
Q2: Can I add my logo on the boxes/cartons?
A: Yes, we have a R&D capability and professional & efficient team, OEM and ODM are available from us.
Q3: What are the benefits of being a distributor?
A: Special discount Marketing protection.
Q4: How can you control the quality of products?
A: Yes, we have engineers ready to assist customers with technical support problems, any issues that may arise during the quoting
or installation process, as well as aftermarket support.
Q5: Can we mix items in full container?
A: Yes. We ship our products in bulk, usually 40 Feet High Cube Containers, but 20 feet containers are also acceptable.
){kind=link}